add infra code

infra/enginewhy-server.rs

@@ -0,0 +1,168 @@
+use sysinfo::{CpuRefreshKind, RefreshKind, System};
+use sysinfo::{Networks};
+use sysinfo::{Disks};
+use std::thread;
+use std::time::Duration;
+use std::net::{TcpStream};
+use std::env;
+use std::collections::HashMap;
+use std::io::Write;
+use serde_json::Value;
+use rperf3::{Client, Config, Protocol};
+
+
+// Default server addresses
+const DEFAULT_REMOTE_IP: &str = "192.67.67.67";
+const DEFAULT_LOCAL_IP: &str = "127.0.0.1";
+const PORT: u16 = 8080;
+const IPERF_PORT: u16 = 5001;
+
+fn get_io_usage_percentage() -> Result<f64, String> {
+    let mut sys = Disks::new_with_refreshed_list();
+    
+    // Refresh disk information
+    sys.refresh(true);
+    
+    // Get first disk (usually main disk)
+    if let Some(disk) = sys.list().first() {
+        let initial_read = disk.usage().total_read_bytes;
+        let initial_write = disk.usage().total_written_bytes;
+        
+        thread::sleep(Duration::from_secs(1));   // 1s
+        
+        sys.refresh(true);
+        let disk = sys.list().first().ok_or("Disk disappeared")?;
+        
+        let new_read = disk.usage().total_read_bytes;
+        let new_write = disk.usage().total_written_bytes;
+        
+        // Calculate Bps
+        let read_per_sec = (new_read - initial_read) as f64; 
+        let write_per_sec = (new_write - initial_write) as f64;
+        
+        // Get disk type to estimate max speed (these are rough estimates)
+        let max_speed = match disk.kind() {
+            sysinfo::DiskKind::SSD => 500_000_000.0, // 500 MBps
+            sysinfo::DiskKind::HDD => 200_000_000.0, // 200 MBps
+            _ => 300_000_000.0, // Default
+        };
+        
+        let io_percentage = f64::min(100.0, ((read_per_sec + write_per_sec) / max_speed) * 100.0);
+        Ok(io_percentage) 
+    } else {
+        Err("No disks found".to_string())
+    }
+}
+
+async fn measure_iperf_bandwidth(server_ip: &str, port: u16) -> Result<f64, Box<dyn std::error::Error>> {
+    // Configure the test (use the provided port)
+    let config = Config::client(server_ip.to_string(), port)
+        .with_duration(Duration::from_secs(10));
+
+    // Run the test
+    let client = Client::new(config)?;
+    client.run().await?;
+
+    // Get results
+    let measurements = client.get_measurements();
+    let bandwidth_bps = measurements.total_bits_per_second();
+    println!("iperf3 reported max bandwidth: {:.2} Mbps", bandwidth_bps / 1_000_000.0);
+    
+    Ok(bandwidth_bps)
+}
+
+#[tokio::main]
+async fn main() -> std::io::Result<()> {
+    // Determine server IP from CLI: `--localhost` -> local, otherwise remote
+    let args: Vec<String> = env::args().collect();
+    let server_ip = if args.iter().any(|a| a == "--localhost") {
+        DEFAULT_LOCAL_IP.to_string()
+    } else {
+        DEFAULT_REMOTE_IP.to_string()
+    };
+
+    let mut stream = TcpStream::connect(format!("{}:{}", server_ip, PORT))?;
+    println!("server connected to {}:{}", server_ip, PORT);
+
+    // Initialize the system struct
+    let mut sys = System::new_with_specifics(
+        RefreshKind::nothing().with_cpu(CpuRefreshKind::everything()),
+    );
+    let mut networks = Networks::new();
+    networks.refresh(true);
+
+    // Probe max bandwidth using iperf3
+    let mut max_bps: f64 = 0.0;
+    match measure_iperf_bandwidth(&server_ip, IPERF_PORT).await {
+        Ok(bps) => {
+            max_bps = bps;
+            println!("iperf3 reported max bandwidth: {:.2} bits/sec ({:.2} Mbps)", max_bps, max_bps / 1e6);
+        }   
+        Err(e) => println!("iperf3 failed: {}", e),
+    }
+
+    // Wait a bit because CPU usage is based on diff.
+    std::thread::sleep(sysinfo::MINIMUM_CPU_UPDATE_INTERVAL);
+    loop {
+        sys.refresh_all();
+
+        sys.refresh_cpu_usage(); // Refreshing CPU usage.
+        let mut cpu_usage: f64 = 0.0;
+        for cpu in sys.cpus() {
+            cpu_usage += cpu.cpu_usage() as f64;
+        }
+        cpu_usage /= sys.cpus().len() as f64;
+        println!("CPU usage is {}%", cpu_usage);
+
+        // Memory usage
+        let total_mem = sys.total_memory();
+        let used_mem = sys.used_memory();
+        let mem_usage = total_mem as f64 / used_mem as f64;
+        println!("Memory usage is {}%", mem_usage);
+
+        // Network bandwidth usage
+        let mut bandwidth: f64 = 0.0;  // Bps
+        for (interface_name, network) in &networks {
+            if interface_name == "wlp2s0" {
+                bandwidth = network.transmitted() as f64;
+                println!("[{interface_name}] transferred {:?} %", bandwidth / max_bps * 100.0);
+            }
+        }
+        networks.refresh(true);
+
+        // Calculate percent usage of measured max bandwidth (if available)
+        let net_usage_pct: f64 = if max_bps > 0.0 {
+            f64::min(100.0, (bandwidth / max_bps) * 100.0)
+        } else { 0.0 };
+
+        // IO usage
+        let mut io_usage = 0.0;
+        match get_io_usage_percentage() {
+            Ok(percentage) => {
+                io_usage = percentage;
+                println!("I/O usage is {}%", percentage)
+            },
+            Err(e) => println!("Error: {}", e)
+        }
+        println!();
+
+        // Identify this process (client) by the local socket address used to connect
+        let server_identifier = match stream.local_addr() {
+            Ok(addr) => addr.to_string(),
+            Err(_) => format!("localhost:{}", PORT),
+        };
+
+        let mut packet: HashMap<String, Value> = HashMap::new();
+        packet.insert("server_ip".to_string(), Value::String(server_identifier));
+        packet.insert("cpu".to_string(), Value::from(cpu_usage));    // %
+        packet.insert("mem".to_string(), Value::from(mem_usage));    // %
+        packet.insert("net".to_string(), Value::from(net_usage_pct));
+        packet.insert("io".to_string(), Value::from(io_usage));
+
+        let serialized_packet = serde_json::to_string(&packet)?;
+        let _ = stream.write(serialized_packet.as_bytes());
+
+        thread::sleep(Duration::from_secs(10));
+    }
+}
+